SINOTRUK HOWO 4X2 4 Brush Road Sweeper Truck For Nigeria

The Nigerian customer had already purchased a dump truck from us before and used the truck very well after receiving it, so he contacted us again to ask for the price of the road sweeper truck, and we recommended the SINOTRUK HOWO 4X2 4 Brush Road Sweeper Truck to the customer, which has high operating efficiency and good cleaning effect. We also gave the customer a very favorable price, the customer is very trust us, and soon paid the deposit, and now our factory has finished production.

 

 

The SINOTRUK sweeper truck is through the sweeping brush rotation, the sidewalk gutter leaves, white residue, small stones, etc. swirling swept to the suction cup under the suction cup to facilitate the suction cup will be pollutants sucked into the sewage tank storage. Through the main spray bar and side spray bar on the nozzle jet out of the high-pressure water flow, the road surface and the crevice inside the sediment flushing out the formation of sewage belt, moved to the suction cup under the suction cup to facilitate the suction cup will be pollutants sucked into the sewage tank storage. When the garbage and pollutants in the sewage tank reaches the preset position, it is necessary to discharge the sewage through the sewage valve at the back of the equipment.

 

 

The centralized operation control in the cab of the HOWO 4X2 sweeper truck is convenient to operate. Sweeping disk speed can be adjusted according to different sweeping conditions, select high, medium and low three gears, which can ensure a good sweeping effect in various pollution conditions. Adopting advanced and efficient special fan, with excellent anti-seismic and anti-corrosion performance. The front and rear water tanks are made of high-quality stainless steel, with large water tank volume and long working time. Adopting self-made wear-resistant sweeping brush, greatly reducing the use of costs.

 

 

About the maintenance of the sweeper truck: every 2-3 working days, the water filter housing should be removed to rinse the screen. Open the water filter to take out the water filter element, and use a brush to wash the surface and crevices of the water filter element. If the water filter element is damaged, it should be replaced immediately. After the cleaning is completed, the screen fixing surface and the water filter housing must be tightened to ensure that the seal and the screen is smooth and intact, otherwise it is easy to cause the water pump suction vibration due to the water filter is not sealed or the screen is clogged with no water, which causes the water pump suction vibration and damages the water pump.