How To Operate Water Truck Spraying and Sprinkling？

The water truck can be used both for transporting drinking water and for cleaning work in cities and construction sites. When carrying out watering work, you should make sure that there are no obstacles or pedestrians around the vehicle, and after the operation, you should wash the vehicle in time and park it in the designated place. This article will introduce water truck spraying and sprinkling operating predurces in detail.

 

 

 

1. Open the three-way ball valve to water-outside, close the absorbing water side.

 

2. Close the back-water ball valve of pump.

 

3. Add the tank full of water.

 

4. Open the manual ball valves of front sprinkler or rear sprinkler.

 

5. Open the pneumatic ball valves of front sprinkler or rear sprinkler before working.

 

6. Connect the water pump and power take-off and start sprinkling when driving or parking.

 

7. After finish sprinkling ,close the manual ball valves and the pneumatic ball valves of front sprinkler or rear sprinkler.