SINOTRUK HOWO NX 380HP 10 Cubic Meters Concrete Mixer Truck For Guyana

The customer in Guyana has been working with us for a long time and has purchased a lot of trucks and trailers from us and we have reached a very pleasant cooperation. Recently, the customer contacted us again, wanting to buy a mixer truck, we recommended to the customer SINOTRUK HOWO NX 380HP 10 Cubic Meters Concrete Mixer Truck, the customer is very satisfied with our recommendation, many times of co-operation has been very trustworthy to us, and soon paid the deposit. Our factory also arranged the production very soon, and now it has been completed, waiting for delivery.

 

 

The concrete mixer truck adopts WEICHAI engine with modularized design, which reduces failure points and improves service life. In addition, through the use of aluminum alloy fuel tank, aluminum alloy gas tank and less leaf spring suspension and other lightweight configurations, the vehicle weight is greatly reduced, the cab suspension system can effectively reduce the vibration in the cab, thus reducing driving fatigue. good  Adopting the routing design, the cab moves back after being collided by certain external force, strengthening the protection of drivers and passengers, and the passive safety is unparalleled.

 

 

The role of the drive device is to drive the concrete tank rotation, which consists of the extractor, universal shaft, hydraulic pump, hydraulic motor, operating valve, hydraulic oil tank and cooling device. If this part stops working due to failure, the concrete storage tank will not be able to rotate, which will lead to the car concrete scrap, serious or even make the whole tank of concrete condensation in the tank, resulting in concrete mixer truck scrap. Therefore, whether the drive device is reliable is the use of the problem must be attached great importance. In order to ensure that the drive device is intact and reliable, should do a good job of protection.

 

 

Before loading the concrete mixer truck, the residual water and debris in the mixing cylinder should be drained. It should keep turning during transport to prevent the concrete from segregating. Before the concrete mixer truck arrives at the site and discharges the material, it should make the mixing cylinder rotate at full speed for 1-2 minutes at 14-18 rpm, and then carry out the reverse discharging. Before reversing, the mixing cylinder should be made to stop steadily. In winter construction, it should be done: check whether it is frozen before starting the machine; at the end of the day, carefully remove the residual water in the mixing cylinder and the water supply system, turn off the switch of the water pump, and put the control handle in the position of "stop".